DIY Home Solar Panels Will Cut Your Electricity Bills For Good!

August 8th, 2010 | diy home | No Comments »

DIY home solar panels have been around for many years, but with talks of energy conservation becoming an obsession globally, the need for them as a new alternative energy source has taken on a great urgency.

Using solar power is one of the best ways to conserve energy. And with DIY home solar panels, powering your home on free energy is getting really cheap too. And the best thing is, making your own home solar panels is not a daunting task at all, if you have all the instructions handy.

How To Build Your Own DIY Home Solar Panels

Here’s how to go about making DIY home solar panels for your own home:

1. Get it out of your mind that is going to be a tough deal. In reality, once you study the process of making a solar panel, you will find it is not that difficult at all.

2. Assemble all the tools required. You will need a hacksaw, wood saw, hammer, nails, screws, tape measure and some other hardware tools. Visit a plumber’s shop and you will be able to get these tools with ease.

3. For the panel itself, you could install a sink unit. Look around your home, and you should be able to find one.

4. Use copper to set up the plumbing system for the panel. Copper is considered to be acceptable for plumbing purposes. Be sure to use an inhibitor in the copper pipes.

5. Blacken the absorber plate first. This will allow it to absorb the light and heat from the sun effectively. Attach the copper tubing to the blackened absorber plate. You can also use aluminum as an alternative to copper. Both have good thermal properties. Aluminum wins the race here as it is cheaper.

6. House the absorber plate in a wooden tray. Apply a maintenance coating to the wooden tray, possibly painting it. This will reduce the maintenance efforts of the solar panels.

7. DIY home solar panels are extremely sensitive to the availability of sun at all times. Expose them to cool weather, and you will automatically see a dip in performance. Cover the panels with glass or acrylic to prevent heat loss. This will provide you with all-year round heating.

Points To Remember When Building DIY Home Solar Panels

1. The copper tube could run the risk of freezing during cold conditions. To prevent this happening, ensure that the panel drains down.

2. At times, the water in the solar panel could freeze because of difference in temperatures between the solar panel and the environment. You can avoid this by using an anti-freeze circuit in the solar panel.

3. The construction of the panel frame is often the most critical aspect. The frame should be made of hardwood, preferably of materials like cedar or teak.

As you can see, making a solar panel in your own backyard is all about following basic plumbing and designing steps. If you have basic plumbing skills and an eye for detail, you could well be on your way to making the technology of DIY home solar panels work for you as it has for thousands of others.

Dimmer Switch air compressor

Residential DIY Solar Electricity Home System – Renewable Energy Solar Power

March 22nd, 2010 | diy home | No Comments »

Convert solar power, solar energy into Solar Electricity for a complete home solar electricity power system

There has been a remarkable revolution in the renewable energy throughout the world. Business and residential home owners are now starting to think about using alternative power source to fossil fuel generated electricity.

Large companies and medium size industries the world over need to realize their responsibility to reduce the toxic gases that are omitted into the environment from using fossil fuel generated power.

The internet has provided some of the answer for a lot of do it yourself home owners and small business that they can purchase diy home solar kits and packages with full illustrated step by step guides on how to build or make solar panels and home wind power generators

The whole process with renewable energy is to create solar electricity to power the homes and factories. This is achieved by converting sun energy and wind energy into household electricity.

Renewable energy, solar electricity, wind power generator, wind energy all can be build into a

Complete Home Solar Electricity Power System.

There are two options for the system, one is off the grid completely and the other is partially off the grid.

Option One. Completely off the grid means the home owner or small business install a system that will have batteries that refer to a battery bank and this battery bank will be set up and wired to produce 12 or 24 volts and this is achieved by connecting the batteries in a series or parallel.

An industry accepted standard is that a 24 volt system is superior to the 12 volt system but is a personal choice and of course a cost selection as you would expect the 24 volt system will contain more batteries. More batteries that are used and wired into the power system the better its performance and longer the system will last. Solar solution designers refer to battery discharge rate that affects the life of the batteries.

Complete Home Solar Electricity Power System produces 120 a.c. voltage required by the homes appliances.

What happens with the completely off the grid set up is the home is power at night by the battery bank and then recharged during the day with the solar panels.

What if.

It’s raining or cloudy the next day then this is when a lot of home owners build and install a home wind power generator to supplement the home solar power system while others may opt for an alternator/generator backup system.

Second option is partially off the grid which means at night the house starts to use the power grid electricity. A cost effective way to get started and easy to install and is a start to reducing your power bill and saving you money.

The power system can be added to as time and money allows. Most commonly used is in semi- remote areas where the power lines are within reach of the house.

Both systems if larger enough can produce excess solar electricity than what the load [electricity] of the house is using at any time during the day.

This excess solar electricity is feed back into the power grid and the power is credited to your account by using a special net meter supplied by the power company.

How it works.

You generate more solar electricity than you need, you put this power back into the grid and when you use more power than the home power system generates, you take it back from the grid up to a stage when you start paying for the electricity again.

Beaded Curtain

DIY Solar Energy – Reduce Home Electricity Bill With Solar Power

February 14th, 2010 | diy home | No Comments »

How do we use a Do It Yourself (DIY) home solar energy system to reduce our electricity bill? One of the major expenses of our homes is the electricity bill. We use electricity to power all our household appliances. Most electric power plants use either oil or coal to generate power. We know the supply of this material is limited therefore as housing development grows, the cost of electric power will increase as well. How do we shield ourselves from future rising cost of electricity? One option is to use a renewable energy source such as solar power.

The current challenge of using solar energy to power our homes is the high cost. If you were to engage a contractor to do the retrofitting, be prepared to invest a few thousand dollars. Many people would not be able to afford that. As an alternative, we can build our own homemade solar energy system via a DIY approach.

The idea of extracting the power from the sun ray is quite simple. We need to install an array of solar cells on the roof to collect the energy from the sun and convert it into electric power. The power from the sun is stored in rechargeable deep cycle batteries. Since most or our home electric components use AC current, we need an AC converter to change the DC power from the batteries into alternate current.

To reduce our household electricity bill is a matter of connecting our home appliances into the solar power system. The amount of power we can use from the system will depend on the size of the solar panels and also the number of batteries. If we were to aim for 10 percent energy cost reduction, the amount of money saved will be quite substantial after a few years.

http://diyhomedepot.ndesignsblog.com/

Solar Power 101 – how does sunlight about-face into electricity

January 31st, 2010 | diy home | No Comments »

Please sign the Declaration of Endependence at www.endependence.info/declaration . Short and concise explanation of solar photovoltaic systems. How do they work? Do I need batteries? Produced by the on-line local action network, Endependence.info. Show us how you are saving energy. We’ll copy your great ideas. Energy independence, we can’t do it alone, but we can do it together.

diygardennetwork.wordpress.com

Home innate charm Architect electricity generator agent adamantine drives

December 11th, 2009 | diy home | No Comments »

www.cleanrepublic.freeforums.org) has a wind turbine (electrical generator using components from the U.S. e-waste. www.cleanrepublic.freeforums.org

remodeling-diy.blogspot.com toolsandequipmentnetwork.wordpress.com

Get cheap renewable energy to their electricity bill

November 28th, 2009 | diy home | No Comments »

EnergyForHome.net Stop paying your energy bills and throwing money out the window. Find out how solar panels for household use for a very small and cheap investment! Find out how thousands of people around the world have their electricity bills reduced by 80% and sometimes completely eliminates them by the best DIY Solar Power Guide to the planets, the step-by-step instructions and videos which can make even a novice teenager solar switchgear can follow. Visit http Now! This is not…

http://diyhomedepot.sabuyblog.com/ http://diyhomedepot.idatablog.com/ landscaping-tutorials.blogspot.com/